Friday, June 3, 2011

HID Kit install on a JK


This is the connector that goes from the stock headlight wiring to the ballast.
This is the HID bulb.
This is the kit. The blue things are the ballasts.

I removed the grille. Had to loosen the bolts on the winch to do so.
Aftermarket horn is in the way!
This is an H13 male adapter that I bought.


These are the leads that plug into the male adapter. (leads from the kit that go to the ballasts). I soldered them on.



The male adapter is connected and a capacitor is added on. This is the link to the capacitor I used: http://www.radioshack.com/product/index.jsp?productId=2102508 I
I used electric tape to tape around the capacitor and wiring to weatheproof it.

The lights work and do not flicker.



Posted by at

3 comments:

  1. AnonymousDecember 8, 2011 at 2:40 AM

    great man great ideas i like it for my car and love it like a fan so your work is appreciate able and in the last i would like to thank you dear for sharing it with us so nicely hid flickering fix

    ReplyDelete
  2. limestructJuly 20, 2012 at 12:08 PM

    Thanks for sharing with this installation. You can check out this kind of HID Kit.

    ReplyDelete
  3. UnknownFebruary 5, 2013 at 11:24 AM

    I recently purchased this HID headlight conversion kit and I am wondering why the lights are coming out with a blue tint. Could this be a problem with the ballast or is it the type of bulb I purchased? I didn’t notice the bulbs having any color to them. Also one light seems a little bluer than the other. Please help…Thanks!

    ReplyDelete

Subscribe to: Post Comments (Atom)